Tag Archives: stole

New release

Verão
Verão

I was just reminded that this test knit has taken 3 months so far. Oddly enough, it seems like less time.

I had so much fun designing and knitting this stole, and the test knitting went so well, I didn’t feel the time passing.  Now – finally! – the pattern is released and other people can enjoy knitting it too.

Verão might not be a good choice for a fast knit, but will be perfect for after the holidays knitting, when most of us are looking for something more challenging, without a deadline ;).

You can see more photos and read more about this gorgeous stole here.

Quick tip

I’ve been drooling over a blocking frame I saw on a website for a long, long time.  The problem was that those frames are quite expensive and the shipping from Germany would probably be outrageous.
The frame itself isn’t that different from a big embroidery hoop, with holes along its length – if you have one of the Haapsalu books,  you’ve seen photos of frames with wooden pins to hold the knitting to the frame.

Where the German blocking system gets interesting is that it uses elastic bands with hooks at one end to hold the knitting to the frame.  Because the elastic is…well, elastic, those hooks distribute the tension better, which makes for a more even finished shape – be it a circle, a triangle or any other polygon.

I’ve had a wooden frame for some time now, but the first time I used it, I secured the knitting to the frame using push pins.

Alpenrose framed
Alpenrose framed

There were a few problems with that – it only really works if the knitting has scallops at the edges, you need a helper and, in the end, both Joel and I had sore fingers from pushing pins into the wood.

After using the frame, I took it apart and it had been sitting in the basement ever since.  I wasn’t happy with the pin method and didn’t really had a need for a 8 ft frame since then.

Until Verão.  The stole is – without aggressive blocking – 8 ft long.  Up came the pieces of the frame and the first blocking began.
After many hours of fighting the frame, the cord I used to thread through the knitting, the knitting itself, I ended up with an upset husband and a very badly blocked stole.

Now, because I’ve had the German frame in the back of my mind for years, I’d already stocked up on rubber bands and paper clips ;).  After a week or so of waiting (for the first time since I began blocking my knitting, I was afraid), I soaked the stole again, grabbed the rubber bands and paper clips, the pieces of wood and went to block the stole again.  And this time I was alone.

Shadow of the stole
Shadow of the stole

I’m happy to report that it did work!   Despite the fact that Verão is big and long, the time it took for me to attach the stole to the frame was small and almost trouble-free.

The rubber bands didn’t slide as I hoped, but then again, the wood is unfinished and untreated.  If I had long enough dowels or even PVC pipes, evenly distributing the rubber band would had been easier.

If I ever make something this big again, I’d attach another piece of wood half way the long sides of the frame to prevent the wood from bending in, but other than that, it worked just fine and the stole has even dimensions throughout.

Close-up of the paper clips/rubber bands
Close-up of the paper clips/rubber bands

I think this setup would also work for things with straight edges and round shawls with a few adjustments.

For straight edges, I’d thread blocking wires or some cotton thread close to the edge and put the clips at closer intervals.

For circular shawls, I’d place longer rubber bands near the corners of the frame.

The one important thing about using this method is to make sure that when you put the paper clips in, you don’t split the yarn.

Score!

We live in an old, small house, pretty much in the middle of downtown.  Right across from our front yard there’s a beautiful park where most of the spring and summer events happen.

We can sit on our front porch and appreciate the music every Wednesday evening, during the spring time.  We’re also just a few steps away from the two major art fairs that happen in town every year.  This is the perfect set up for us, since we don’t like to plan things ahead of time, specially on weekends – to me, weekends are meant to be spent with a go with the flow attitude: do whatever we feel like doing, without having to plan ahead for it.

When I came downstairs yesterday morning, I noticed that the park’s parking lot (did I mention that the park is across the street from us?) was full.  Lots of cars, some with trailers attached.  That meant something was going on.  So I got closer to the window and from there I could see a few tents set up.

Since the weather was still nice (it wouldn’t last, though.  It got to 103F in the afternoon), we decided to go check it out.  It turns out that the Fall Art Fest(? Fair?) was going on.  The first booth we saw, as soon as we got there, was from a couple who sells iron work – garden decor and sculptures.
They had an amazing kinetic sculpture at the front, so we decided to look at the other things they had.  That’s when I saw her, standing by the side of the booth, almost hidden amongst all the other cool stuff they had – the perfect prop for displaying my shawls when doing a photo shoot: my new model.

I checked the price tag and couldn’t believe my eyes.  She was being sold for a third of the price of similar ones I’ve seen before!  And I had the money :D!  She came home with me and in a few hours she’ll be housed upstairs in the one-day-this-will-be-a-studio-room.

I’d like to introduce you to my new model.  Seen here displaying Verão, my latest design (soon to be released).

Verão
Quatro Estações Collection – Verão

She does an amazing job at modeling, doesn’t she?  On the next photo we can see her back, and how well she displays the stole.

IMG_5293
Quatro Estações Collection – Verão back